flutter разработчик

Novus Bolashak LLC

Mechanical Commissioning Engineer

С 01.10.2021 по настоящее время (3 года 3 месяца)

Responsible for supporting and promote high level of safety culture during all work and preparation activities. Making to drive the planned daily Project commissioning activities. Doing support and mentoring of commissioning team skills training. Supporting interfaces with Construction, equipment vendor representatives, operations and start up teams through the handover process. Direct commissioning Senior Technicians and Subcontractors to execute the work in the field. Reporting to Discipline Commissioning Area Lead, member of Project Management team. Focal point for development of work packs, determining engineering issues and support with closure of same. Making Redline marks ups as required by RFI procedure.

Novus Bolashak LLC

Mechanical Commissioning Engineer

С 01.10.2021 по настоящее время (3 года 3 месяца)

Responsible for supporting and promote high level of safety culture during all work and preparation activities. Making to drive the planned daily Project commissioning activities. Doing support and mentoring of commissioning team skills training. Supporting interfaces with Construction, equipment vendor representatives, operations and start up teams through the handover process. Direct commissioning Senior Technicians and Subcontractors to execute the work in the field. Reporting to Discipline Commissioning Area Lead, member of Project Management team. Focal point for development of work packs, determining engineering issues and support with closure of same. Making Redline marks ups as required by RFI procedure.

Tesla Tan LLP

Mechanical Commissioning Supervisor

С 01.02.2021 по 01.11.2021 (9 месяцев)

Responsible to ensure that all activities comply with the Project health, safety and environmental policies and procedures. Liaise with the Mechanical Engineering function of the Pre-Commissioning Team on behalf of the Pre-Commissioning Manager. Responsible to ensure that all equipment Lubrication Schedules have been adhered to before the commencement of commissioning in that Area, or on specific equipment being commissioned. Assist with Mechanical Team reviews of Construction C0 Test Packs to ensure that equipment is ready for rotational checks and load testing. Assist with the management and recording of all bearing Temperature and Vibration Testing Checks and records, required by the Pre-Commissioning Team. Utilize team extracted from the Contractor's mechanical support team who are tasked to perform these duties. Liaise with the Electrical and Process Engineers to formulate 2 week look ahead schedules for workload, so that the Contractor can provide sufficient support staff for C-1 bearing and gearbox monitoring. Assisting to manage a Contractor Teams Mod squad activities on a day to day basis in order to close out deficiencies, remove and replace guards as required, do motor and shaft alignments and replace and tension belts as required. Assist with the Mechanical Commissioning of the Crushers, Material Handling Systems, Gearbox Driven Drives, Thickener Mechanisms, hydraulic systems, compressor systems and any other mechanical equipment deemed technically challenging. Utilize Electrical and Process personnel to assist you whenever needed. Raising Purchase Orders for any equipment, spares or tools deemed necessary to perform commissioning activities. Raising Scope of Work and CORF's in order to mobilize contractors deemed necessary for commissioning assistance or testing, passport and certification of mechanical equipment. Coordinate the collection and delivery of C-1 and C-2 Test Sheets for entry into the Progress Tracking System and filing into PCM Test Packs.

Dietsmann SA Kazakhstan Branch

Lead Mechanical Engineer

С 01.01.2020 по 01.08.2021 (1 год 7 месяцев)

Coordination the preservation activities on 3GI area at Tengiz. Interface between client and subcontractors at site. Working with specification and CMS data base, Coreworx and MC Plus. Preparation the weekly reports. Updating weekly Clearance Sheets. Giving the recommendations to sub contractors to sort out the problem during work process. Borescope inspection and recomendation to remove the corrosion. Working with PMR procedure. Accept of new rotating and static equipments. Closely working with sub contractor's for Walkdown inspections at site.

«WG PSNK» JSC

Mechanical Supervisor

С 01.11.2018 по 01.10.2019 (11 месяцев)

Reboiler project The Supervision of (Mechanical, Piping, Structural and Welding) scope of work at site. The installation of new spools and valves selection of gaskets and bolts and bolt tightening as per drawing. Destruct of spools and steel for modifications. The installation of pipe supports of different types, beams, handrail and gratings. The preparation of pipes and flanges for welding. Participation in commissioning. The preparing permit to work. Compliance with all rules and regulations of HSE. Scheduling and providing daily report and timesheet.

«WG PSNK» JSC

Mechanical Technician

С 01.04.2018 по 01.10.2018 (6 месяцев)

Responsible for Toolbox talks and Permit to Work. Has checked piping & mechanical materials, fittings, valves availability at store Transportation materials on work area. Coordination of work with other departments and subcontracting companies (scaffolding, rigging, and electrical, mechanical, material). Controlled quality, work schedule, daily work schedule, and housekeeping Coordination and conducting Safety Audits on site with Safety Department Checked waste management, housekeeping, correct PPE.

«WG PSNK» JSC

Senior Mechanical & Piping Technician (Site Survey Team)

С 01.12.2017 по 01.03.2018 (3 месяца)

Maersk, DUNGA OIL Field SAP Data Build Project Responsible for Site validation, survey works and implementation of Tags. Gathering of information inspection of all mechanical equipment, pipe units and pipeline with compliance with P&ID, marking, photo report and making all changes and preparing P&ID for new design. Daily full report in written and electronic form.

«WG PSNK» JSC

Mechanical & Piping Technician

С 01.04.2015 по 01.08.2017 (2 года 4 месяца)

(Offshore of Kashagan Project D-Island) Constraction & Modification, Start Up, Maintenance. -​ Process equipment construction & commissioning; «Siemens», «Rolls Royce», «General Electrics», «Nuovo Pignone», «Man Turbo» compressors and gas turbines. -Repair and installation of rotating equipment (rotating equipment) -Participated in the dismantling and replacement of the Gas Compressor Erection & Aliagment for the Siemens Gas Compressor at Kashagan Offshore new Installation on Module 3, 4 & 16 Flash Systems, replacement of oil and bearings, coolant Installation (Installation -alignment couplings) -Production Of commissioning Monitoring The motor no-load rotation without coupling and coupling -​ Equipment start up, green-run and putting into service; All the appropriate equipment and block valves testing, maintenance and overhauling.

STAMGazStroy LLP

Mechanical Technician

С 01.02.2014 по 01.07.2014 (5 месяцев)

(Onshore of Bolashak plant). Participation in the test plant equipment for technical accuracy in determining the optimal operation of equipment to facilitate its effective use in developing instructions on operation , lubrication equipment and care for him , the safe conduct repairs.Preparation for testing of flanged connections, pipelines.Over-hauling of pumps, compressors and valves, trouble-shooting and condition monitoring of Static and Rotary equipment.Safety valves (PSV) gaskets of different types and diameters, tensioning bolts etc.

«WG PSNK» JSC

Mechanical Technician

С 01.11.2012 по 01.12.2013 (1 год 1 месяц)

(Offshore of Kashagan Project D-Island) Commissioning (Icat). Knowledge on pre – commissioning activities, water flushing, air blowing, re-instatement and leak testing.Conduct of hydrotest for additional line and modification line. Conduct of air leak test for all mechanical joint as per mechanical isolation sheet. Removing, cleaning and reinstall of control valve, check valve, orifice plate, strainer, flow element etc. including replacing the gasket and stud bolts. Helping to find materials for start and complete the gross air leak test Liaison with process engineers involving safety, technical queries, installation and testing; Responsible to perform and maintain PTW and WRAP; Mechanical ICC (log in & log out) qualified on pipeline for gross air leak test.

Университет

Atyrau Oil & Gas University

Университет

ATYRAU POLYTECHNIC COLLEGE

Университет

BOSIET (Basic Offshore Safety Induction & Emergency Training)

Родной язык

Русский

Иностранные языки

Английский, Казахский

Ключевые навыки

• Работа в команде

• • точность и внимательность к деталям

• oil and gas

• compressors

• Total cost management nuclear construction

• commissioning

Дополнительная информация

My experience in mechanical works in rotary equipment, pressure vessels ,boilers, heat recovery steam generator, fin fan cooler, pumps,gas and instrument compressor driven by electric motor or gas turbines.Execution hydro and pneumatic tests of the equipment and pipelines. Carried out installation of gas generator for Rolls Royce. Siemens compressors with Siemens vendors at Modules 3,4,16.To obtain a challenging position at the company that will utilize both my educational background and professional experience to contribute to the organization’s goals and to provide excellent opportunities for career development and personal growth.More than 5+ years of professional experience and excellent track record in the Mechanical Maintenance Preventive/ Corrective / Breakdown / Shutdown Turnaround Maintenance, Commissioning of Rotating and Static Equipment in Oil and Gas Industries.Maintenance experience includes over-hauling of pumps, compressors and valves, trouble-shooting and condition monitoring of Static and Rotary equipment. Preventive maintenance of all rotating equipment as per schedule, mechanical seal replacement, etc.