программист lua

Ural Oil & Gas

Lead Mechanical Engineer

С 01.09.2023 по 01.04.2024 (7 месяцев)

The job responsibilities of the Lead Engineer include: • Performs his/her duties under the general supervision of the first head of the organization, his/her deputies and immediate supervisor and in cooperation with heads of other subdivisions and services; • Within the limits of his/her competence, supervises the activities of the relevant structural subdivisions (services) in the direction and coordination of the subdivision's work, solves administrative issues; • Ensures trouble-free and reliable operation of all types of equipment, their proper operation, timely quality repair and maintenance, works on its modernization and increase of efficiency of equipment repair service; • Performs technical supervision over the condition and repair of protective devices on mechanical equipment, buildings and structures of the shop, organizes preparation of calendar plans (schedules) of inspections, checks and repair of equipment, requests for centralized performance of major repairs, for obtaining materials, spare parts, tools necessary for preventive and current repairs, preparation of passports for equipment, specifications for spare parts and other technical documentation; • Participate in the acceptance and installation of new equipment, carrying out works on certification and rationalization of workplaces, modernization and replacement of inefficient equipment with high-performance equipment, introduction of mechanization means for heavy manual and labor-intensive work; • Organizes accounting of all types of equipment, as well as depreciated and obsolete equipment, preparation of documents for their write-off; • Studies the operating conditions of equipment, individual parts and assemblies to identify the causes of premature wear, analyzes the causes and duration of downtime associated with the technical condition of the equipment; • Develops and implements progressive methods of repair and restoration of units and parts of mechanisms

Ural Oil & Gas

Lead Mechanical Engineer

С 01.09.2023 по 01.04.2024 (7 месяцев)

The job responsibilities of the Lead Engineer include: • Performs his/her duties under the general supervision of the first head of the organization, his/her deputies and immediate supervisor and in cooperation with heads of other subdivisions and services; • Within the limits of his/her competence, supervises the activities of the relevant structural subdivisions (services) in the direction and coordination of the subdivision's work, solves administrative issues; • Ensures trouble-free and reliable operation of all types of equipment, their proper operation, timely quality repair and maintenance, works on its modernization and increase of efficiency of equipment repair service; • Performs technical supervision over the condition and repair of protective devices on mechanical equipment, buildings and structures of the shop, organizes preparation of calendar plans (schedules) of inspections, checks and repair of equipment, requests for centralized performance of major repairs, for obtaining materials, spare parts, tools necessary for preventive and current repairs, preparation of passports for equipment, specifications for spare parts and other technical documentation; • Participate in the acceptance and installation of new equipment, carrying out works on certification and rationalization of workplaces, modernization and replacement of inefficient equipment with high-performance equipment, introduction of mechanization means for heavy manual and labor-intensive work; • Organizes accounting of all types of equipment, as well as depreciated and obsolete equipment, preparation of documents for their write-off; • Studies the operating conditions of equipment, individual parts and assemblies to identify the causes of premature wear, analyzes the causes and duration of downtime associated with the technical condition of the equipment; • Develops and implements progressive methods of repair and restoration of units and parts of mechanisms

Tengizchevroil via Bolashak Atyrau FGP/3GP Construction Project

Mechanical Static Equipment QC Inspector

С 01.12.2020 по 01.09.2022 (1 год 9 месяцев)

Responsibilities: Provide overall static package equipment technical leadership, expertise and mentoring capabilities. Review, comment and approve work performed by Contractor to ensure compliance to specifications, codes and standards. Direct and oversee the activities of inspection, monitoring and certifying the quality of all static package equipment and project installations including surveys. Participate in site material receiving inspections, conduct field erection inspections to ensure compliance to erection tolerances and in accordance with the applicable Inspection and Test Plans (ITP). Maintain good record keeping of activities carried out and inspection reports, surveillance reports, etc. Ensure Contractor Organizational capability is qualified and competent for Static Equipment installation. Provide expertise and leadership in equipment levelling, alignment, machinery installation, pipe strain and the use of laser alignment equipment. Ensure ‘Contractor Quality Requirements’ are being met and the Company Surveillance Program is implemented and effective. Review, comment and approve work performed by Contractor to ensure compliance to specifications, codes and standards. Participate and commit to the project Incident and Injury Free (IIF) Program. Comply with all Project HSE requirements i.e. PPE, work Permits etc. Attend inspection activities as directed by Mechanical Advisor / Site Quality Team Lead. Review Contractor’s completion files for accuracy and adequacy. Ensure Exhibit F-5 ‘Contractor Quality Requirements’ are being met and the Company Surveillance Program is implemented and effective. Review and comment documents submitted by Contractor (FRB/MRB’s). Reports to 3GP Site Quality Team Lead. Demonstrate working knowledge of applicable codes, such as ASME Sec I, V, VIII and IX.  ANSI B31.3/4/8 and API 620/650/686. Experience in managing inspection / mechanical personnel in a project environment. Working knowledge in all construction disciplines; Civil, Structural, Pipe, Mechanical, and Welding required. Strong communication and organizational skills

Halliburton FGP/3GP Construction Project

Supervisor site technicians QC Inspector (Flange Management Connection)

С 01.01.2020 по 01.11.2020 (10 месяцев)

Responsibilities: TCO and Contractor point of contact for FM issues and actions at assigned project area.   Gather construction schedule and milestone information from the Project teams and forward to Site Project Manager and Engineer.   Coordination of FM activities and PPS personnel at the worksite.  Review contractors craft training programs and FM procedures.  Conduct sample audit/ surveillance on FM witnessing activities for all criticality work scopes including 5% witness sampling of vendor package joints.  Coach and mentor Senior Technicians & Site Technicians to ensure a consistent standard of FM is achieved.  Provide feedback to the Site Project Manager and TCO Project Quality Team on issues and concerns.  Complete daily operational reports and issue to the Site Project Manager.  Ensure anomalies are reported to Project Quality teams and effectively closed-out in a timely manner.  Support the Engineer in resolving queries/issues regarding onsite commissioning activities.   Provide weekly and monthly reports detailing all flange surveillance within their work area to Site Project Manager and TCO quality team.  Attend all scheduling and quality meetings where aspects of flange management are included.  Attend Weekly flange management meeting and present the weekly report key items.  Coordinate sign-off of respective FM Summary reports – Pre-Hydro, MC & RFSU.  Coordinate FM Tag handover to Contractor and forward signed consumable reports to Site Project Manager.  Arrange and facilitate weekly meetings through the project quality teams with the key project contractors.

Baker Hughes & GE Company with Ersai company, Project FGP/TCO Turnaround period

Bolting Supervisor

С 01.03.2019 по 01.12.2019 (9 месяцев)

Responsibilities: Flange Face Inspection Identify flange, gasket, bolt & nuts material Hydraulic bolt tightened. Tensioning. Manual torquing. Perform work in accordance with the rules, requirements and policies of TCO in the field of labor protection, safety and environmental protection. Develops methodological and other documents, technical documentation, as well as proposals and activities for the implementation of developed projects and programs. It studies and analyzes information, technical data, indicators and results of work, makes the necessary calculations using modern electronic computers. Assist O&M teams as required. Conduct QA/QC/HSE compliance checks on site procedures and health and safety plans. Work with computers using Microsoft Windows and office suites. Read, write and speak English, and be able to communicate with the majority of the workforce in their language. Experience with and be fully aware of various pipes, gaskets and bolting materials Be able to organize several mechanical technicians Be able to organize materials, services and equipment for their work. Have experience and be able to troubleshoot, test and suggest repair methods without any intervention Be trained in twisting/pulling techniques and the use of the specific equipment used. Read drawings and technical documentation related to the work to be done and the requirements to be met Know the requirements for a torque/tension/mechanical technician. Carries out a daily analysis of the degree of danger of the work performed. Provide technical leak detection and repair services. Provides the project with appropriate tools and equipment. Interact with customers.

Project Sakhalin Energy. Company “Gazprom”. Offshore work on behalf of Baker Hughes company. Turnaround period

Bolting Supervisor

С 01.06.2018 по 01.09.2018 (3 месяца)

Responsibilities: Flange Face Inspection, Identify flange, gasket, bolt & nuts material, Hydraulic bolt tightened. Tensioning. Manual torqueing. HLD (Helium Leak Detection) Line walk system by P & ID. Rig Up & Rig Down all test equipment. DecantingLN2 Perform work in accordance with the rules, requirements and policies of Sakhalin Energy/Gazprom in the field of labor protection, safety and environmental protection. Develops methodological and other documents, technical documentation, as well as proposals and activities for the implementation of developed projects and programs. It studies and analyzes information, technical data, indicators and results of work, makes the necessary calculations using modern electronic computers. Assist O&M teams as required. Conduct QA/QC/HSE compliance checks on site procedures and health and safety plans. Work with computers using Microsoft Windows and office suites. Read, write and speak English, and be able to communicate with the majority of the workforce in their language. Experience with and be fully aware of various pipes, gaskets and bolting materials Be able to organize several mechanical technicians Be able to organize materials, services and equipment for their work. Have experience and be able to troubleshoot, test and suggest repair methods without any intervention Be trained in twisting/pulling techniques and the use of the specific equipment used. Read drawings and technical documentation related to the work to be done and the requirements to be met Know the requirements for a torque/tension/mechanical technician. Carries out a daily analysis of the degree of danger of the work performed. Provide technical leak detection and repair services. Provides the project with appropriate tools and equipment. Interact with customers.

Fircroft LLP. Halliburton Project. TCO /КТL Turnaround period

Bolting Supervisor

С 01.06.2017 по 01.08.2017 (2 месяца)

Responsibilities: Flange Face Inspection Identify flange, gasket, bolt & nuts material Hydraulic bolt tightened. Tensioning. Perform work in accordance with the rules, requirements and policies of TCO in the field of labor protection, safety and environmental protection. Develops methodological and other documents, technical documentation, as well as proposals and activities for the implementation of developed projects and programs. It studies and analyzes information, technical data, indicators and results of work, makes the necessary calculations using modern electronic computers. Assist O&M teams as required. Conduct QA/QC/HSE compliance checks on site procedures and health and safety plans. Work with computers using Microsoft Windows and office suites. Read, write and speak English, and be able to communicate with the majority of the workforce in their language. Experience with and be fully aware of various pipes, gaskets and bolting materials Be able to organize several mechanical technicians Be able to organize materials, services and equipment for their work. Have experience and be able to troubleshoot, test and suggest repair methods without any intervention Be trained in twisting/pulling techniques and the use of the specific equipment used. Read drawings and technical documentation related to the work to be done and the requirements to be met Know the requirements for a torque/tension/mechanical technician. Carries out a daily analysis of the degree of danger of the work performed. Provide technical leak detection and repair services. Provides the project with appropriate tools and equipment. Interact with customers.

Halliburton, Kazakhstan-Atyrau, TCO/SGP Turnaround period

Bolting Supervisor

С 01.07.2016 по 01.09.2016 (2 месяца)

Responsibilities: Flange Face Inspection Identify flange, gasket, bolt & nuts material Hydraulic bolt tightened. Tensioning. Manual torqueing Perform work in accordance with the rules, requirements and policies of TCO in the field of labor protection, safety and environmental protection. Develops methodological and other documents, technical documentation, as well as proposals and activities for the implementation of developed projects and programs. It studies and analyzes information, technical data, indicators and results of work, makes the necessary calculations using modern electronic computers. Assist O&M teams as required. Conduct QA/QC/HSE compliance checks on site procedures and health and safety plans. Work with computers using Microsoft Windows and office suites. Read, write and speak English, and be able to communicate with the majority of the workforce in their language. Experience with and be fully aware of various pipes, gaskets and bolting materials Be able to organize several mechanical technicians Be able to organize materials, services and equipment for their work. Have experience and be able to troubleshoot, test and suggest repair methods without any intervention Be trained in twisting/pulling techniques and the use of the specific equipment used. Read drawings and technical documentation related to the work to be done and the requirements to be met Know the requirements for a torque/tension/mechanical technician. Carries out a daily analysis of the degree of danger of the work performed. Provide technical leak detection and repair services. Provides the project with appropriate tools and equipment. Interact with customers.

GE Oil & Gas, Kazakhstan - Aksay, Project - Karachaganak Petroleum Operating B.V (Unit - 2) Turnaround period

Gas Turbine Mechanical Specialist

С 01.04.2016 по 01.05.2016 (1 месяц)

Responsibilities: Mechanical pre-completion & completion, commissioning. Arrangement of HSE induction to maintenance personnel at working site, where jobs will be commenced. Preparation of permit to work. Conduction of toolbox talk. Carrying out gas testing for checking the availability of gaseous atmospheres prior to job performance and every 30 minutes. Troubleshooting of turbine and auxiliary equipment. Dismantling and dispatching of turbine to repair workshop. Disassembling and defect revealing of turbine internals and revision of auxiliary equipment. (at repair workshop) Repair of turbine and auxiliary equipment. Reinstallation of turbine back on site, alignment and connection of auxiliary equipment. 72- hours testing together with Instrument team and scheduled activities after testing.

Hydratigh, Saudi Arabia, PETRORABIGH Project, Turnaround period

Bolting Supervisor

С 01.11.2015 по 01.01.2016 (2 месяца)

Responsibilities: Flange Face Inspection Identify flange, gasket, bolt & nuts material Hydraulic bolt tightened. Tensioning. Manual torquing HLD (Helium Leak Detection) Line walk system by P&ID Perform work in accordance with the rules, requirements and policies of Saudi Aramco in the field of labor protection, safety and environmental protection. Develops methodological and other documents, technical documentation, as well as proposals and activities for the implementation of developed projects and programs. It studies and analyzes information, technical data, indicators and results of work, makes the necessary calculations using modern electronic computers. Assist O&M teams as required. Conduct QA/QC/HSE compliance checks on site procedures and health and safety plans. Work with computers using Microsoft Windows and office suites. Read, write and speak English, and be able to communicate with the majority of the workforce in their language. Experience with and be fully aware of various pipes, gaskets and bolting materials Be able to organize several mechanical technicians Be able to organize materials, services and equipment for their work. Have experience and be able to troubleshoot, test and suggest repair methods without any intervention Be trained in twisting/pulling techniques and the use of the specific equipment used. Read drawings and technical documentation related to the work to be done and the requirements to be met Know the requirements for a torque/tension/mechanical technician. Carries out a daily analysis of the degree of danger of the work performed. Provide technical leak detection and repair services. Provides the project with appropriate tools and equipment. Interact with customers.

Halliburton, KTL1 Tengiz Field, Kazakhstan. Turnaround period

Senior Bolting Technician - Flange Management

С 01.06.2015 по 01.09.2015 (3 месяца)

Responsibilities: Flange Face Inspection Identify flange, gasket, bolt & nuts material Hydraulic bolt tightened. Tensioning. Manual torquing HLD (Helium Leak Detection) Line walk system by P&ID Responsible for the safe and successful completion of manual and hydraulic tightening of flange and clamp bolts. Responsible for the careful handling of manual and hydraulic tightening equipment (manual, hydraulic tongs and pumps). Responsible for the identification of equipment using customer process diagrams (P&ID) and isometric drawings (ISO). Supervises the bolting technicians as the work progresses. Provides assistance in operating the equipment in accordance with the Safety Procedure and operating procedure. Assists with maintenance and pre-operational checks of equipment as needed, and approves equipment readiness for use. Assists in the collection of information for the submission of reports on the work performed. Reports to the supervisor on broaching of bolted connections. Performs any other duties as directed by management.

Hydratight, Kazakhstan Atyrau Kashagan A-D Island

Machining and Bolting Technical specialist

С 01.12.2011 по 01.06.2015 (3 года 6 месяцев)

Responsibilities: Flange Face Inspection Identify flange, gasket, bolt & nuts material Hydraulic bolt tightened. Tensioning. Manual torquing HLD (Helium Leak Detection) Line walk system by P&ID Rig Up & Rig Down all test equipment Decanting LN2 Hydro test Provides control of high-quality and timely repair of technological equipment in accordance with the schedule of scheduled preventive maintenance. Implement highly efficient repair devices, mechanization of labor-intensive processes. Correction of the condition and proper operation of equipment, tools, devices, communications, production equipment, personal protective equipment, as well as for the correct conduct of work, compliance by employees with production instructions and labor protection rules. Prepares the equipment for operation after repair, technical inspection of devices and components, controls the parameters and reliability of equipment elements, performs test checks in order to detect malfunctions in a timely manner. Participates in the investigation of the causes of accidents, increased wear and downtime of equipment, takes measures to prevent them. Participates in testing and acceptance of equipment for commercial operation. Proper operation of lifting, welding, ventilation equipment, lifting mechanisms, pressure vessels. Participates in the development of long-term and current work plans, maintenance and repair of equipment, measures to improve operation and increase the efficiency of equipment use.

KazStroyService, Kazakhstan - Uralsk

Gas Plant Operator

С 01.09.2009 по 01.06.2010 (9 месяцев)

Gas boiler control

KazTransGas Aimak JSC, Kazakhstan - Uralsk

Production Technical Engineer

С 01.06.2008 по 01.08.2009 (1 год 2 месяца)

Robot with drawings, issuing technical specifications for gas

KazTransGas Aimak JSC

Lead Specialist - Fire Station Department

С 01.09.2007 по 01.05.2008 (8 месяцев)

Emergency Service Rapid Response Team

Университет

Higher technical education Kazakhstan, Uralsk West Kazakhstan Agrarian technical University (WKATU) on behalf of Zhangirkhan of oil and gas specialized technologies

Родной язык

Казахский

Иностранные языки

Английский, Русский

Ключевые навыки

• Php

Дополнительная информация

Responsibility, carefulness, punctuality, work in a team, purposefulness